EcoClean CDS Gross Pollutant Traps

Gross Pollutant Traps or GPTs are structures designed to remove litter, debris and coarse sediment from storm water. Only few types of gross pollutant traps, such as our Ecoclean CDS Gross Pollutant Traps and CleansAll Gross Pollutant Traps are designed to remove all types of gross pollutants, including sediment, oil and grease effectively from storm water.

Ecoclean CDS Gross pollutant traps may also be used as pretreatment for flows into a pond or wetland to confine and trap the sediment for easy removal, thus protecting the lakes and waterways from being polluted by gross pollutants and sediment. CDS Gross pollutant traps are commonly used to remove both coarse and fine sediment before the flow enters a filtration device such as a rainwater harvesting tank or on-site detention tank to prevent clogging of the filtration device.

Ecoclean CDS Gross Pollutant Traps are specially designed storm water treatment devices with an effective and patented method of separating solids from liquids.

Based on a surprisingly simple combination of Non-Blinding screens and flow management, Continuous Deflective Separation or CDS Technology is a non-powered, low maintenance alternative to traditional direct screening system.

Ecoclean CDS Gross Pollutant Traps are designed to be retrofitted into existing and newly constructed drainage systems. The unit covers a minimum of surface space, with lids specially designed for the location and pre-engineered for traffic loading. Generally located beneath the ground, the unit requires no support infrastructure or power.

Ecoclean CDS Gross Pollutant Trap uses indirect screening to trap even smaller pollutants. A unique, non-blocking screen design deflects particles into a catchment area while clean water flows to the waterway.

An engineered product that has harnessed complex hydrodynamic principles …

What is CDS

… into a simple & cost-effective system that significantly reduces contamination of our waterways

  • Captures and retains close to 100% of all solid materials, irrespective of flow conditions
  • Utilises indirect screening, preventing the screen from blinding
  • Visually unobtrusive
  • Various unit sizes to suit application and site requirements
  • Ease of cleaning by means of basket, eduction or utilizing a customized cleaning truck

A NUMBER OF APPLICATIONS HAVE BEEN DEVELOPED USING THE CDS GROSS POLLUTANT TRAPS:

Storm Water
Ecoclean CDS Gross Pollutant Trap has been highly successful in removing pollutants from the storm water system. Some high profile sites within Australia and overseas have used the technology to keep the waterways clear of litter, vegetation and other matter flowing through the storm water systems.

Industrial
Ecoclean CDS Gross Pollutant Trap has been of great use to industrial sector. The indirect screening provides a non- blinding separation system for a number of processes. CDS Gross Pollutant Trap has been effectively used in separating pollutants from cooling liquids, sediments from site runoff and washdown facilities.

Fine Solid Separation
Ecoclean CDS Gross Pollutant Trap has been specially developed with a high rate process for the removal of suspended solids from sewage. It achieves a stream that is highly amendable to disinfection for the treatment of sewer overflows. It is suitable for reuse in many applications, especially ideal for feeding to biological processes with low particle BODs, COD levels.

Sewer Overflows
Sewer overflows have polluted waterways around the world. Ecoclean CDS Sewer Overflow Unit (CSO) has been specially developed to remove gross solids from sewer overflow locations. The gross solids are effectively separated and returned to the sewage systems while the screened fluid is then diverted into the overflow line.

CDS® Units –
Continuous Deflection
Separation Technology

CDS® gross pollutant traps (GPTs) are designed to capture and retain gross pollutants, litter, grit, sediments and associated oils, utilising patented CDS® indirect screening technology.

Rocla offers a complete design service for CDS® products that takes into account the catchment’s characteristics, pollution load, hydraulic site constraints and opportunities, system capacities, velocity, backwater, as well as the location of services and access for cleaning. Hydraulic reports are available on request and are automatically carried out for larger units.

Applications:

  • Residential subdivisions
  • Commercial and industrial developments
  • Main stormwater drainage systems
  • Retrofitting to existing stormwater drainage systems
  • Stormwater harvesting projects
  • Combined sewer overflows
  • Any other applications where the target pollutants are primarily gross pollutants and oils and sediments

LEARN ABOUT CDS TECHNOLOGY:

Comparison between normal direct filter screen and CDS indirect screening technology
Normal Direct Screening Indirect CDS Screening Technology
With normal direct filter screening, particles impact directly on the screen and eventually cause blinding With CDS indirect screening, particles sweep past screen which remains clear

CDS is the only non-blocking screening technology independently validated by world-class research organizations such as:

  • CSIRO – Commonwealth Scientific & Industrial Research Organization.
  • CRCCH – Co-operative Research Centre for Catchment Hydrology.
  • UCLA – University of California Los Angeles.
Description Capture Rate
Gross Pollutants (> 5mm) 99%
Coarse Sediments (> 0.125mm) 95%
Floatable Pollutant 99%
Total Solid Suspension (TSS) 70%*
Free oils and grease in spill situation 95%
Total Phosphate > 20%

With longer retention time achieved using one single bigger unit CDS can achieve 3 to 4 LEED points as proven in Malaysia first LEED COLD Green Building SHELL 3 in Cyberjaya.

These are the three methods of litter removal from the CDS unit. All methods involve a minimum of manual handling.
Eduction (Suction) Vacuum Truck Removable Basket Unit Materials Grab Truck
The litter basket is easily maintained using either of these methods:

  • Vacuum Suction
  • Installed Basket – Simply lift out pollutants with a crane
  • Grab/Clamshell – Using a clamshell type grab bucket
Vacuum & Suction Installed Basket Grab/Clamshell
Stormwater
CDS has been highly successful in removing pollutants from the stormwater system. Some high profile sites within Australia and overseas have used the technology to keep the waterways clear of litter, vegetation and other matter flowing through the stormwater systems.
Sewerage Overflows
Sewer overflows have polluted waterways around the world. CDS has developed a product that removes gross solids from sewer overflow locations. The gross solids are separated and returned to the sewerage system and the screened fluid is then diverted into the overflow line.
Industrial
The CDS technology has been of great use to the industrial sector. The indirect screening provides a non-blinding separation system for a number of processes. CDS has been involved in separating pollutants from cooling liquids, sediments from site runoff and washdown facilities.

When sizing a CDS unit for a given site, the following things are taken into account:

  • Catchment Area
  • Catchment use and imperviousness leading to pollutant loadings
  • Flowrates for the 3 month event
  • Performance requirements of the approval authority
  • Desired cleaning method and frequency
  • Site constraints
  • Budget constraints

The table below provides a general guideline only for sizing a CDS unit. CDS have a team of staff of experienced engineers who can design a system specific to your requirements.

CDS Units: Key characteristics

CDS Model No Catchment Area

(ha)

Pollution Storage in Sump

m3

Underground Footprint

m

Ground Level Footprint Diameter

m

F0506 ≤ 1 0.50 1.0 x 1.0 0.9
P0708 ≤ 2 1.80 1.5 x 1.5 1.3
F0908 ≤ 4 2.65 1.5 x 1.5 1.3
F0912 ≤ 6 2.95 1.5 x 1.5 1.3
P1009 ≤ 8 3.35 2.0 x 2.0 1.3
P1012 ≤ 12 3.60 2.0 x 2.0 1.3
P1015 ≤ 18 3.80 2.0 x 2.0 1.3
P1512 ≤ 20 7.10 2.6 x 2.6 1.8
P2018 ≤ 45 19.00 3.5 x 3.5 2.3
P2028 ≤ 75 21.50 3.5 x 3.5 2.3
P3018 ≤ 100 28.50 6.5 x 6.5 3.5
P3024 ≤ 150 32.75 6.5 x 6.5 3.5
P3030 ≤ 200 37.00 6.5 x 6.5 3.5
C4527 200-250 58.50 8.0 x 8.0 5.0
TWIN ≤ 500 variable variable variable

NOTE :

  1. CDS Model Selection Table shall only be used for initial sizing. Actual CDS model shall be determined by detailed engineering. Please check with EcoClean Technology Sdn Bhd for your specific needs.
  2. Twin precast unit combination can be used to treat larger flows – detail on request

Key

P Precast Concrete
F Fiberglass
C Cast-in-place

* Based on vacuum suction

  • P2018 Precast unit with screen diameter 2000mm and height 1800mm
  • F0912 a Fiberglass unit with screen diameter 900mm and height 1200mm

Other Specific Applications ( details on request )

  • CDS Surface / Rainwater filtration unit
  • CDS Sewer overflow unit (CSO)
  • CDS Stainless steel or FRP industrial separator
  • CDS Sewer mining process for reuse water
  • CDS Smart water (Class A re-use water)
  • CDS filternator media filtration system
  • EcoClean Ausdrain Stormwater System for rainwater harvesting, re-use, infiltration, on site detention and bio-remediation.
  • Ecoclean oil and grease trap.
  • EcoSac wastewater primary screening
  • Vacuum fluid evacuation system
  • CDS Hybrid Advanced Immobilised Cell Reactor Technology (India) for water / Wastewater Treatment.

Department of Irrigation & Drainage
Urban Stormwater Management Manual for Malaysia
(Manual Saliran Mesra Alam Malaysia)
2000

Volume 13
Treatment Control
Best Management Practices (BMPs)
Gross Pollutant Traps (GPTs)
“…taking into consideration the present problems faced by the nation such as flash flood, river pollution …”

ASPLE GREEN TECHNOLOGY

Your Trusted Partner In Water Consultant And Engineering Solution

contact us